|
| 1. Disconnect a pressure head hose from the pump of the amplifier of a steering. Between the disconnected pressure head hose and the pump connect the special measuring tool, as is shown in drawing. |
| 2. Pump over a hydraulic drive of the amplifier of a steering, then start up the engine and turn a steering wheel some times so that the liquid temperature has raised to 50°C. |
|
3. Increase frequency of rotation of a cranked shaft of the engine to 1000мин–1. |
| 4. Close the valve of the switch of the special tool and measure pressure. The pressure of a liquid created by the pump of the amplifier of a steering: 6,2 мПа |
The prevention
Do not hold the valve of the switch of the special tool closed more than 10 with.
|
| 5. Remove special tools and connect a pressure head hose to the pump, having tightened a connecting nut of a hose the demanded moment. The inhaling moment: 55–65 Н•м |
| 6. Remove air from a hydraulic drive of the amplifier of a steering. |