Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
- 13. Brake system
   13.1. Specifications
   13.2. Antiblocking system of brakes (ABS)
   13.3. Prorolling of hydraulic system of a drive of brakes with scanner use
   13.4. Check and adjustment of position of a pedal of a brake
   13.5. Check of the vacuum amplifier of brakes
   13.6. Prorolling of hydraulic system of a drive of brakes
   13.7. Adjustment of a course of a lay brake
   13.8. The vacuum amplifier of brakes
   13.9. Brake tubes and hoses
   13.10. A pressure regulator
   13.11. A brake pedal
   13.12. Replacement of lobbies brake колодок
   13.13. A support of a forward brake
   13.14. The main brake cylinder
   13.15. Replacement brake колодок on back drum-type brakes
   13.16. Replacement of the working brake cylinder
   13.17. A lay brake
   13.18. Hydraulic block HECU ABS
   13.19. The gauge of frequency of rotation of a wheel
   13.20. Search and elimination of malfunctions
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes




комоды и тумбы для обуви
такелажные узлы
авто с пробегом под выкуп
дочь лолиты милявской
текущий ремонт сроки проведения



13.5. Check of the vacuum amplifier of brakes

PERFORMANCE ORDER
1. Start the engine and in 1–2 minutes stop it. Press a pedal of a brake with usual effort. If the first course of a pedal a long and second course is shorter, than the first course is testifies to normal work of the vacuum amplifier of brakes.
2. At the switched off engine some times press a brake pedal. Start the engine. If the brake pedal moves downwards at once after engine start-up, it testifies to normal work of the vacuum amplifier of brakes.
3. Start the engine.
Press a pedal of a brake with usual effort. Stop the engine. Slowly press a pedal of a brake and keep its pressed during 30 with. If the pedal height does not change, the vacuum amplifier of brakes works normally.

Otherwise, check up the unilateral vacuum valve or a vacuum hose on absence of damages and check up reliability of their fastenings.