Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
- 14. A body
   14.1. Specifications
   14.2. Adjustment of hinges of a cowl
   14.3. A luggage carrier cover
   14.4. Adjustment of a door of a luggage space
   14.5. A forward door
   14.6. A back door
   14.7. Молдинги
   14.8. The roof hatch
   14.9. An external rear-view mirror
   14.10. The central console
   14.11. The panel of devices
   14.12. Ceiling furnish
   14.13. A back shelf
   14.14. A luggage carrier upholstery
   14.15. An internal upholstery of salon
   14.16. A windscreen
   14.17. Back glass
   14.18. A forward bumper
   14.19. A back bumper
   14.20. A back seat
   14.21. A forward seat
   14.22. Search and elimination of malfunctions
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes







14.5. A forward door

Removal and installation

PERFORMANCE ORDER
1. Release скобу handle fastenings стеклоподъемника and remove the handle. Скоба it is released if to insert a pure fabric between the handle and an upholstery of a door and, stretching a fabric opposite to the ends скобы, hook скобу and release it. Thus it is necessary to pull the handle on itself that she after clearing скобы has acted in film with шлицов a shaft стеклоподъемника.
2. Turn out the screw of fastening of the internal handle, then press the handle in a direction of loops of a door and remove it from a door upholstery.
3. Remove an internal cover and an external rear-view mirror.
4. Turn out screws of fastening of an upholstery of a door.
5. Insert a stripper of an upholstery of a door between an upholstery of a door and a door and release percussion caps. Disconnect electric sockets.
6. Remove an upholstery of a door and lower glass.
7. Turn out three screws and remove динамик from a forward door.
8. Remove a windowpane.
9. Remove external влагозащитную a strip from a door.
10. Turn out screws and remove стеклоподъемник.
11. Remove directing door glasses.
12. Remove draught and the activator of the lock from the external handle of a door.
13. Remove a door latch, the modulator and the external handle of a door.
14. Installation is spent to sequences, return to removal.

Adjustment of position of a door


PERFORMANCE ORDER
1. Check up, that the door is closed easily and properly. If the door has люфт, tighten bolts of fastening of hinges of a door.
2. In need of carrying out of adjustment of position of a door concerning adjacent surfaces the special tool 09793–21000 adjust loops.

The prevention

Attach a protective tape to the sides of a wing located opposite to a loop of a door.



Shock plate of a door


PERFORMANCE ORDER
1. Check up, that the door is closed easily and properly. If the door lock is established on a shock plate hardly, turn out screws of fastening of a shock plate and, moving it in horizontal and vertical planes, achieve normal closing of a door.
2. Adjustment of position of a door concerning adjacent surfaces spend moving of a shock plate to a vertical plane.

Door glass


PERFORMANCE ORDER
If door glass non-uniformly is closed, adjust a corner of installation of glass in a direction from the forward party to a back part.