Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
- 15. A central air
   15.1. Specifications
   15.2. The instruction on coolant application
   15.3. Remarks at replacement of elements of a central air of air
   15.4. Connection of elements of a central air of air
   15.5. Check of elements of the central air established on the car
   15.6. Installation of manometres for pressure measurement
   15.7. Откачка atmospheric air from a central air
   15.8. Gymnastics of a central air of air
   15.9. Check of level of a coolant
   15.10. Check of operational characteristics
   15.11. Oil for greasing of the compressor of the conditioner
   15.12. Relay check
   15.13. The conditioner compressor
   15.14. The plug of coupling and a pulley of the compressor of the conditioner
   15.15. The coil of excitation of coupling
   15.16. Compressor check on the car
   15.17. The gauge of threefold (double) pressure
   15.18. The fan and the condenser
   15.19. The evaporator
   15.20. Check of the thermostatic gauge (термистора)
   15.21. The air filter of the evaporator
   15.22. The heating and ventilation block
   15.23. The heater block
   15.24. The fan
   15.25. Search and elimination of malfunctions
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes







15.11. Oil for greasing of the compressor of the conditioner

Oil for greasing of the compressor of the conditioner circulates in system at compressor work. At replacement of any element of a central air of air at considerable leak of a coolant add in system oil that its volume has remained at initial level.

Oil volume: 140–160 sm3

Oil condition

PERFORMANCE ORDER
1. Oil should not contain a moisture, a dust, metal particles etc.
2. Do not mix some oil of various types.
3. Moisture content in oil increases, if it remains opened on air long time. After use of oil the capacity with oil is necessary for closing immediately tightly.

To check level of oil or to add oil it is necessary at engine work on frequency of rotation of a cranked shaft of the engine idling and at high frequency of rotation of the fan.

At replacement of elements of system be convinced, that have added only certain volume of oil.

Volume of the oil added at replacement:
The evaporator: 40 sm3
The condenser: 25 sm3
Receiver dryers/: 40 sm3
The compressor: 30 sm3
Tubes: 15 sm3