Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
- 15. A central air
15.1. Specifications
15.2. The instruction on coolant application
15.3. Remarks at replacement of elements of a central air of air
15.4. Connection of elements of a central air of air
15.5. Check of elements of the central air established on the car
15.6. Installation of manometres for pressure measurement
15.7. Откачка atmospheric air from a central air
15.8. Gymnastics of a central air of air
15.9. Check of level of a coolant
15.10. Check of operational characteristics
15.11. Oil for greasing of the compressor of the conditioner
15.12. Relay check
15.13. The conditioner compressor
15.14. The plug of coupling and a pulley of the compressor of the conditioner
15.15. The coil of excitation of coupling
15.16. Compressor check on the car
15.17. The gauge of threefold (double) pressure
15.18. The fan and the condenser
15.19. The evaporator
15.20. Check of the thermostatic gauge (термистора)
15.21. The air filter of the evaporator
15.22. The heating and ventilation block
15.23. The heater block
15.24. The fan
15.25. Search and elimination of malfunctions
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes
|
The gauge of threefold (double) pressure represents the combined switch of low pressure (to check up quantity of a coolant), average pressure (for inclusion of the fan of the condenser) and a high pressure (for overheat prevention).
The gauge is established in an exhaust pipe and when pressure becomes approximately equal 200 кПа or less, the condenser fan, thus excluding a compressor overheat is switched off. When pressure reaches 1400 кПа, the condenser fan is switched off, consumption of energy by it thus is prevented. When pressure reaches 3214 кПа, the compressor is switched off.
Removal
| PERFORMANCE ORDER |
| 1. Discharge air central air. |
| 2. Disconnect a socket from the threefold (double) gauge of pressure. |
| 3. Turn out the threefold (double) gauge of pressure. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is spent to sequences, return to removal. |
| 2. Pump out, charge and check up air central air. |
|
|
|