1. To enter the password, you will need to turn the ignition key in position "ОN" (Incl.) and then in position "ОFF" (Off), according to numbers of figures, the control lamp of an immobilizer will blink thus.
For example, for figure of input "1", turn the ignition key in that order once, for figure "2", two times, etc. If figure "0" number, it is necessary for you to turn the ignition key in that order ten times. |
| 2. Wait 3–10 c. | |
3. Enter the remained figures of the password, having done operations on points 1 and 2. |
| 4. After all four figures have been entered successfully, turn the ignition key in position "ОN" (Incl.) and be convinced, that the control lamp of an immobilizer burns. Since this moment you should start the engine during 30 c. To start the engine after 30 c it will be impossible. |
The prevention If during movement in emergency operation of work the engine has decayed, you can start the engine during 8 c, not making operation for transition in work emergency operation again.
| | 5. If the control lamp of an immobilizer blinks during 5 c, you should repeat again operations for work emergency operation from the very beginning. |
The prevention If you did not manage to do successfully operation for inclusion of emergency operation of work three times successively, it is necessary to wait about one hour before the subsequent performance of these operations.
If, in spite of the fact that you have successfully made operations for inclusion of emergency operation of work, you cannot start the engine, tow off your car to official dealer ХЁНДЭ.
| |
