Hyundai Accent

Repair and car operation



Hyundai Accent
- 1. The maintenance instruction
   1.1. The general data on the car
   1.2. Keys
   1.3. An immobilizer (anticreeping system of blocking of start of the engine)
   1.4. Anticreeping system
   1.5. Locks of doors
   1.6. A children's safety lock of a back door
   1.7. Forward seats
   1.8. Стеклоподъемники
   1.9. System of the centralised management of locks of doors
   1.10. Safety measures at using seat belts
   1.11. Care of seat belts
   1.12. Fastenings of seat belts of forward seats regulated on height
   1.13. A three-dot seat belt of the driver with the inertial mechanism of blocking
   1.14. A seat belt with fastening in two points (the central seat belt of back sitting)
   1.15. Children's seats
   1.16. Inflatable pillows of safety
   1.17. The panel of devices and контрольно measuring devices
   1.18. The index of level of fuel
   1.19. The index of temperature of a cooling liquid
   1.20. A speedometer
   1.21. Одометр (the counter of the passed way)
   1.22. The counter of daily run
   1.23. A tachometre
   1.24. The combined switch of light of headlights and turn indexes
   1.25. The switch of a cleaner and a windscreen washer
   1.26. A cleaner and a washer of back glass
   1.27. The proof-reader of light of headlights
   1.28. The emergency light alarm system
   1.29. A heater of back glass
   1.30. The switch of forward antifog headlights
   1.31. The switch of back antifog light
   1.32. Electronic clock
   1.33. Прикуриватель
   1.34. A forward ashtray
   1.35. A back ashtray
   1.36. A coaster
   1.37. Sun-protection шторка
   1.38. The hatch
   1.39. A lamp of illumination of salon
   1.40. A ware box
   1.41. External rear-view mirrors
   1.42. A heater of external rear-view mirrors
   1.43. Folding of external rear-view mirrors
   1.44. An internal rear-view mirror
   1.45. A lay brake
   1.46. Folding of backs of seats
   1.47. A back door / a luggage carrier cover
   1.48. Emergency opening of the lock of a cover of a luggage carrier
   1.49. Remote opening of the lock of a back door / of a cover of a luggage carrier
   1.50. Remote opening of a cover of a bulk mouth of a fuel tank
   1.51. Cowl opening
   1.52. Противосолнечный a peak
   1.53. Adjustment of height of installation of a steering wheel
   1.54. A sound signal
   1.55. Heating and ventilation system
   1.56. A cleaner of air for the evaporator and the fan
   1.57. A stereosystem
   1.58. The aerial
   1.59. Car driving
   1.60. The ignition lock
   1.61. Start-up of the engine of cars with the carburettor engine
   1.62. A mechanical transmission
   1.63. An automatic transmission
   1.64. Antiblocking system of brakes
   1.65. Economic driving
   1.66. Smooth passage of turns
   1.67. Movement in winter conditions
   1.68. Trailer or car towage
   1.69. The engine is not started
   1.70. If the engine is normally scrolled by a starter, but not started
   1.71. If the engine has decayed during movement
   1.72. Start-up of the engine from the storage battery of other car
   1.73. If the engine has overheated
   1.74. Car towage
   1.75. Emergency towage
   1.76. Prevention of corrosion and periodic leaving
   1.77. Identification number of the car (VIN)
   1.78. Car technical characteristics
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes




1.55. Heating and ventilation system

The panel of system of heating and ventilation is shown in drawing.

The panel of system of heating and ventilation:

1 – the switch of operating modes of the fan;
2 – the handle of a choice of a mode of ventilation;
3 – the handle of adjustment of temperature of air;
4 – the switch of a choice of a mode of a fence of air.

THE SWITCH OF OPERATING MODES OF THE FAN

The switch is intended for inclusion and deenergizing of the fan and a choice of frequency of its rotation. Frequency of rotation of the fan and, hence, size of the air stream arriving from system of ventilation, can change manually by switch turn between positions "1" and "4".

The switch of operating modes of the fan

THE SWITCH OF THE CHOICE OF THE MODE OF THE FENCE OF AIR

The switch is intended for switching of modes of ventilation between a mode of a fence of external air and a mode рециркуляции.

The switch of a choice of a mode of a fence of air

Mode of a fence of external air

In car salon the external air heated up or cooled depending on a choice of other functions arrives.

Mode рециркуляции air

Occurs рециркуляция air in salon of the car and its heating or cooling depending on a choice of other functions.
The prevention

Mode use рециркуляции air can lead for a long time запотеванию wind and lateral glasses, and air in car salon becomes застоялым. Moreover, long work of the conditioner in a mode рециркуляции air can lead to that air in the car becomes too dry.


CHOICE OF THE MODE OF VENTILATION

The handle of a choice of a mode of ventilation is used for a choice of a direction of an air stream.

 

In head area

The air stream through дефлекторы arrives in the top part of salon of the car.

In area of feet / of a head

Air arrives through дефлекторы in the top part of salon of the car and in area of feet. It allows simultaneously warm air to move through дефлекторы to feet, instead of нагретому or is weak нагретому to air through дефлекторы in the top part of salon.

In area of feet

Air arrives only in area of feet.

In area of feet / to дефлекторам heating of a windscreen and lateral glasses

Air arrives through дефлекторы in area of feet, and also to a windscreen and glasses of doors. At a mode choice (to дефлекторам heating of a windscreen and lateral glasses) the conditioner will be automatically included.

To дефлекторам heating of a windscreen and lateral glasses

Air through дефлекторы arrives only to a windscreen and glasses of doors of the car. At a mode choice (to дефлекторам heating of a windscreen and lateral glasses) the conditioner will be automatically included.

THE HANDLE OF ADJUSTMENT OF TEMPERATURE OF AIR

The handle is used for inclusion and deenergizing of a heater and a choice of desirable temperature of air.

The handle of adjustment of temperature вохдуха

Handles of management of a heater

For normal work of a heater, establish the switch of a choice of a mode of a fence of air in a mode of a fence of external air and the handle of a choice of a mode of ventilation in position (in area of feet).

Handles of management of a heater

For faster heating, establish the switch of a choice of a mode of a fence of air in a mode рециркуляции air

In a case запотевания glasses, establish the handle of a choice of a mode of ventilation in position (to дефлекторам heating of a windscreen and lateral glasses) (thus, it will be automatically included the conditioner), and the switch of a choice of a mode of a fence of air in a mode of a fence of external air.

For the maximum heating, establish the handle of adjustment of temperature of air in position Warm (Hot air).

Mode of giving of air in area of feet / of a head

The mode of giving of air in area of feet / of a head allows simultaneously warm air to move through дефлекторы to feet, and is weak нагретому to air through дефлекторы in the top part of salon. To include this mode establish handles in following positions:

Position of handles in a mode of giving of air in area of feet / of a head

– Establish the switch of a choice of a mode of a fence of air in a mode of a fence of external air;
– Establish the handle of a choice of a mode of ventilation in position (in area of feet / of a head);
– Establish the handle of adjustment of temperature of air between positions Cool (Cold air) and Warm (Hot air).

Ventilation mode

To include ventilation system establish handles in following positions:

Position of handles in a ventilation mode

– Establish the switch of a choice of a mode of a fence of air in a mode of a fence of external air;
– To direct all air stream through дефлекторы heating of a windscreen and lateral glasses, establish the handle of a choice of a mode of ventilation in position (in head area);
– The switch of operating modes of the fan choose desirable frequency of rotation of the fan;
– Establish the handle of adjustment of temperature of air between positions Cool (Cold air) and Warm (Hot air).

CENTRAL ДЕФЛЕКТОР

Central дефлекторы ventilation systems are located in the centre of the panel of devices.

To change a direction of an air stream turn the handle of management which is in the middle central дефлектора, in desirable position.

Directions of moving of the handle of management central дефлектора

LATERAL ДЕФЛЕКТОР

Lateral дефлекторы are located along the edges of the panel of devices. To change a direction of an air stream turn the handle of management which is in the middle lateral дефлектора, in desirable position.

Directions of moving of the handle of management lateral дефлектора

REMOVAL OF HOARFROST / OF THE CONDENSATE (ЗАПОТЕВАНИЯ)

Use this mode for hoarfrost or condensate removal (запотевания).

Position of handles in a mode removal of hoarfrost / of a condensate (запотевания)

For hoarfrost or condensate removal (запотевания) from the interior of a windscreen:

– Establish the switch of a choice of a mode of a fence of air in a mode of a fence of external air in position;
– Establish the handle of a choice of a mode of ventilation in position to дефлекторам heating of a windscreen and lateral glasses (the conditioner will be thus automatically included);
– Establish the handle of adjustment of temperature of air in desirable position;
– Establish the switch of operating modes of the fan between positions "1" and "4".

For hoarfrost or condensate removal (запотевания) from a windscreen outer side:

– Establish the switch of a choice of a mode of a fence of air in a mode of a fence of external air;
– Establish the handle of a choice of a mode of ventilation in position (to дефлекторам heating of a windscreen and lateral glasses) (the conditioner will be thus automatically included);
– Establish the handle of adjustment of temperature of air in position Warm (Hot air);
– Establish the switch of operating modes of the fan in position 3 or 4.

COUNCILS ABOUT MANAGEMENT OF VENTILATION SYSTEM

For prevention of hit of a dust or undesirable smells in car salon, temporarily establish the switch of a choice of a mode of a fence of air in a mode рециркуляции air.

For maintenance of freshness of air in the car do not forget to return the switch of a choice of a mode of a fence of air in a mode of a fence of external air.

It promotes vivacity and a comfortable condition of the driver.

Air for system of heating / of cooling moves through the lattices located directly ahead of a windscreen. Watch that these lattices were free from leaves, snow, ice or other extraneous subjects.

THE CONDITIONER SWITCH

The conditioner joins pressing the conditioner switch control panels a heater / the conditioner.

The conditioner switch

CONDITIONER WORK

Cooling

Use of the conditioner for cooling of air in car salon:

Arrangement of handles at conditioner work in a cooling mode

– Having turned the switch of operating modes of the fan, switch off the fan;
– Pressing the conditioner switch include the conditioner. Thus in a combination of devices the control lamp of inclusion of the conditioner will light up;
– Establish the switch of a choice of a mode of a fence of air in a mode of a fence of external air;
– Establish the handle of adjustment of temperature of air in position Cool (Cold air). This position provides the maximum cooling of air. The temperature of air arriving in salon can change moving of the handle towards position Warn (Hot air);
– The switch of operating modes of the fan choose desirable frequency of rotation of the fan. For the maximum cooling, turn the switch of operating modes of the fan in position of one of the greatest speeds or temporarily establish the switch of a choice of a mode of a fence of air in a mode рециркуляции air.

Draining heating

For draining heating execute following actions:

Arrangement of handles at conditioner work in a mode of draining heating

– Having turned the switch of operating modes of the fan, include the fan. Pressing the conditioner switch include the conditioner. Thus in a combination of devices the control lamp of inclusion of the conditioner will light up;
– Establish the switch of a choice of a mode of a fence of air in a mode of a fence of external air;
– Establish the handle of a choice of a mode of ventilation in position in head area;
– The switch of operating modes of the fan choose desirable frequency of rotation of the fan;
– For process acceleration turn the switch of operating modes of the fan in position of one of the greatest speeds;
– The handle of adjustment of temperature of air establish size of desirable temperature.

Councils about management of the conditioner

If air in the car too hot, open all windows for some minutes to cool air in car salon.

At conditioner work all glasses should be closed not to suppose hit of warm air in car salon.

At slow movement of the car, for example in a road stopper, include lower transfer. It will increase frequency of rotation of a cranked shaft of the engine, that in turn will increase frequency of rotation of the compressor of the conditioner.

On steep slopes switch off the conditioner to exclude possibility of an overheat of the engine.

During the winter period of time, or in irregular use of the conditioner, include the conditioner once a month for some minutes. It prevents deterioration of greasing of internal details of the compressor and provides central air maintenance in a good condition.