Hyundai Accent

Repair and car operation


Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
- 7. Ignition system
   7.1. Specifications
   7.2. System of ignition of engine DOHC
   7.3. Check of the coil of ignition
   7.4. Check of spark plugs
   7.5. The control of spark plugs
   7.6. Check of spark plugs
   7.7. Check of high-voltage wires
   7.8. Ignition coils
   7.9. Installation of high-voltage wires
   7.10. Search and elimination of malfunctions
   7.11. The ignition lock
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes



7.7. Check of high-voltage wires
PERFORMANCE ORDER
1. Disconnect high-voltage wires from candles and ignition coils. Clear and check up integrity of isolation of high-voltage wires. Check up internal surfaces of contacts of high-voltage wires on absence of corrosion or a deposit.
2. By an ohmmeter measure resistance of high-voltage wires.
High-voltage wires of engine SOHC
The cylinder №1 №2 №3 №4
Length, mm 605 545 450 370
Resistance (BOUGI), the Ohm 2,71-4,07 2,44-3,66 2,02-3,02 1,66-2,49
Resistance (R16AIPS), the Ohm 6,05-12,71 5,45-11,45 4,50-9,45 3,70-7,77
High-voltage wires of engine VOHC
The cylinder №1 №2 №3 №4
Length, mm 560 440 360 310
Resistance (BOUGI), the Ohm 2 1 1 1
Resistance (R16AIPS), the Ohm 5 4 3 3
The prevention

Resistance of a high-voltage wire should not exceed 10 000 Ohm, otherwise replace a wire.