Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
- 9. A transmission
   - 9.1. A mechanical transmission
      9.1.1. Specifications
      9.1.2. Check of level of oil
      9.1.3. Replacement трансмиссионного oils
      9.1.4. Replacement of an oil sealing ring of a power shaft
      9.1.5. Replacement of a cable of a drive of a speedometer
      9.1.6. Removal and transmission installation
      9.1.7. Transmission repair
      9.1.8. The gear change mechanism
      9.1.9. A hydraulic drive of coupling
      9.1.10. The gear change lever
   + 9.2. An automatic transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes




9.1.8. The gear change mechanism

1 – a choice and gear change cable;
2 – an arm;
3 – a bolt, 9–14 Н•м;
4 – the lever handle;
5 – the gear change lever;
6 – a casing;
7 – a bolt, 9–14 Н•м.

Removal

PERFORMANCE ORDER
1. Remove the central console.
2. Remove шплинты and clips from the gear change lever.
3. Remove the gear change lever in gathering.
4. Remove the holder and turn out bolts.
5. Remove шплинты and clips from a transmission.
6. Remove a choice and gear change cable.

Check

PERFORMANCE ORDER
1. Check up a cable of a choice of transfers on ease of its moving in a cover of a cable and absence of damages.
2. Check up a gear change cable on ease of its moving in a cover of a cable and absence of damages.
3. Check up a protective cover on absence of damages.
4. Check up all plugs on absence of deterioration, attritions, jammings, restrictions of moving and damages.
5. Check up springs on absence of damages and elasticity reduction.

Installation

PERFORMANCE ORDER
1. Establish the gear change lever in gathering.
2. Establish a choice and gear change cable.