Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
- 9. A transmission
   + 9.1. A mechanical transmission
   - 9.2. An automatic transmission
      9.2.1. Specifications
      9.2.2. A control lamp of malfunctions (MIL)
      9.2.3. Diagnostic codes of malfunctions
      9.2.4. Reading of codes of malfunctions
      9.2.5. Pressure check трансмиссионной liquids
      9.2.6. Testing of teamwork of an automatic transmission and the engine for the motionless car (stall test)
      9.2.7. Check of level of a liquid in an automatic transmission
      9.2.8. Check of work of the lever of the selector
      9.2.9. Adjustment of the switch of indication of position of the lever of the selector
      9.2.10. Adjustment of the servo-driver of compulsory inclusion of a hill-climbing gear
      9.2.11. Pressure adjustment in a highway
      9.2.12. Replacement of an oil sealing ring of a power shaft
      9.2.13. Replacement of a cable of a drive of a speedometer
      9.2.14. Removal and transmission installation
      9.2.15. Transmission repair
      9.2.16. The selector lever
      9.2.17. Adjustment of a cable of management
      9.2.18. Repair of the lever of the selector
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes




9.2.11. Pressure adjustment in a highway

PERFORMANCE ORDER
1. Merge трансмиссионную a liquid from an automatic transmission.
2. Remove the oil pallet.
3. Remove the oil filter.
4. Remove the temperature gauge трансмиссионной liquids.
5. Press a clamp and extend a sealing ring of the electromagnetic valve.
6. Remove valve knot, thus be careful, that it has not fallen.
7. Turn the adjusting screw of the distributor so that pressure in a highway has reached demanded value. Screw rotation clockwise leads to reduction of pressure and, on the contrary, counter-clockwise – to increase.

Nominal pressure: 860–900 кПа
Pressure change at screw turn on 1 turn: 38 кПа

8. Check up, that the sealing ring is established on the top part of the case of the valve, in a place shown in drawing.
9. Replace a sealing ring of the electromagnetic valve.
10. Establish the valve case in картер and insert a socket of the electromagnetic valve in картер. Be convinced, that the gear part of a socket is established how is shown in drawing.
11. Tighten bolts of fastening of the case the moment of an inhaling 10–12 Н•м.
12. Establish the oil filter.
13. Establish a new lining of the oil pallet and the oil pallet.
14. Fill in demanded quantity трансмиссионной liquids in an automatic transmission.
15. Check up pressure in a highway.