Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
- 12. A steering
   12.1. Specifications
   12.2. The mechanism of adjustment of a corner of an inclination of a steering column
   12.3. Steering transfer without the steering amplifier
   12.4. Steering draught
   12.5. Check люфта a steering wheel on cars with the steering amplifier
   12.6. Check of a corner of turn of forward wheels
   12.7. Check of the twisting moment of a pin of the spherical hinge of a tip of steering draught
   12.8. Check of effort of turn of a steering wheel on cars with the steering amplifier
   12.9. Check of return of a steering wheel in a starting position
   12.10. Check of level of a liquid
   12.11. Liquid replacement in a hydraulic drive of the amplifier of a steering
   12.12. Prorolling of hydraulic system of the amplifier of a steering
   12.13. Check of a tension of a belt of a drive of the pump of the amplifier of a steering
   12.14. Check of pressure of a liquid in hydraulic system
   12.15. Steering transfer of cars with the steering amplifier
   12.16. Hoses of the amplifier of a steering
   12.17. The pump of the amplifier of a steering
   12.18. Search and elimination of malfunctions (a steering without the amplifier)
   12.19. Search and elimination of malfunctions (a steering with the amplifier)
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes




12. A steering

The general information

The steering consists of a steering wheel, a steering column, steering gear реечной transfer and steering draughts. The steering wheel is fixed on a shaft of a steering column and transfers effort on gear реечную transfer.

From each party gear рейка steering transfer it is connected by the spherical hinge to cross-section steering draught. Steering draughts transfer effort through steering tips and rotary fists to forward wheels. Such design of a steering has an easy course at absence люфта at turn of a steering wheel from an emphasis against the stop.

For simplification of turn of a steering wheel establish the hydraulic amplifier of a steering consisting of the pump of the amplifier of a steering, put in action a belt from a cranked shaft, a tank with a liquid, hoses and tubes, and steering transfer.

STEERING COLUMN / THE STEERING SHAFT

1 – a bolt, 15–20 Н•м;
2 – an intermediate shaft with universal hinges;
3 – a bolt, 15–20 Н•м;
4 – a bolt, 4–6 Н•м;
5 – a protective cover;
6 – a steering column;
7 – a clip.

Removal

PERFORMANCE ORDER
1. Remove the button of a sound signal and disconnect an electric socket.
2. Turn away a nut of fastening of a steering wheel.
3. Put combination labels on an end face of a steering shaft and a steering wheel and a stripper 09561–11002 remove a steering wheel.

The prevention

Do not knock on a steering wheel as these can damage a steering column.


4. Remove the bottom plug смятия.
5. Turn out screws and remove casings of a steering column.
6. Disconnect electric sockets from switches.
7. Remove multipurpose switches.
8. Turn out a bolt connecting the universal hinge and a shaft of a gear wheel of steering transfer.
9. Turn out bolts, крепящие a steering column to an arm, and remove a steering column from the car.

Dismantling

PERFORMANCE ORDER
1. Ослабьте a bolt of fastening of a steering shaft to the universal hinge also remove the universal hinge.
2. If necessary remove the lock of a steering column, preliminary having cut ножовкой on metals grooves in heads of cut off bolts. Turn away bolts a screw-driver with a flat edge and remove the lock of a steering column.

The prevention

At installation of the lock of ignition it is necessary to use new bolts with a cut off head.


3. If necessary remove the lever and an arm of the mechanism of adjustment of a corner of an inclination of a steering column.

The prevention

Do not assort a steering column and a steering shaft.



Check

PERFORMANCE ORDER
1. Check up a steering column and a steering shaft on absence of damages and deformations.
2. Check up the universal hinge of a steering shaft on absence люфта, damages and jammings.
3. Check up an arm of a corner of an inclination on absence of cracks and damages.
4. Check up work the mechanism of the lock of a steering column.
5. Check up a protective cover on absence of cracks or damages.

Assemblage

PERFORMANCE ORDER
1. Assemblage is spent to sequences to return dismantling.
2. Combine the lock of a steering column with a ledge of a column and insert the ignition key to check up action of the lock of a steering column before a tightening of bolts with cut off heads.

The prevention

Do not use usual screws for fastening of the lock of a steering column.



Installation

PERFORMANCE ORDER
1. Establish the universal hinge on a shaft of a steering column.

The prevention

Be convinced, that the universal hinge is established correctly, as is shown in drawing. Check up, that the bolt has been established correctly in dredging of a shaft of a gear wheel of steering transfer and the bolt end left from an opposite side of the universal hinge.


2. Establish the universal hinge together with shaft of a steering column on a shaft of a gear wheel of steering transfer and temporarily fix a bolt.
3. Establish a shaft of a steering column to an assembly frame.

The prevention

At installation be careful not to bend a steering column.


4. Tighten a bolt of fastening of the universal hinge with shaft of a gear wheel of steering transfer.
5. Establish the multipurpose switch and connect electric sockets.
6. Establish casings of a steering column.
7. Establish the bottom plug смятия.
8. Establish a steering wheel.

The prevention

After steering wheel installation be convinced, that the labels put before removal, were combined also a steering wheel is in position for rectilinear movement.