Hyundai Accent

Repair and car operation


Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
- 14. A body
   14.1. Specifications
   14.2. Adjustment of hinges of a cowl
   14.3. A luggage carrier cover
   14.4. Adjustment of a door of a luggage space
   14.5. A forward door
   14.6. A back door
   14.7. Молдинги
   14.8. The roof hatch
   14.9. An external rear-view mirror
   14.10. The central console
   14.11. The panel of devices
   14.12. Ceiling furnish
   14.13. A back shelf
   14.14. A luggage carrier upholstery
   14.15. An internal upholstery of salon
   14.16. A windscreen
   14.17. Back glass
   14.18. A forward bumper
   14.19. A back bumper
   14.20. A back seat
   14.21. A forward seat
   14.22. Search and elimination of malfunctions
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes



14.6. A back door

 Removal and installation

PERFORMANCE ORDER
1. Release скобу handle fastenings стеклоподъемника and remove the handle. Скоба it is released if to insert a pure fabric between the handle and an upholstery of a door and, stretching a fabric opposite to the ends скобы, hook скобу and release it. Thus it is necessary to pull the handle on itself that she after clearing скобы has acted in film with шлицов a shaft стеклоподъемника.
2. Turn out the screw of fastening of the internal handle, then press the handle in a direction of loops of a door and remove it from a door upholstery.
3. Turn out screws of fastening of an upholstery of a door.
4. Insert a stripper of an upholstery of a door between an upholstery of a door and a door and release percussion caps.
5. Remove an upholstery of a door and lower glass.
6. Turn out screws of fastening of glass to a plate стеклоподъемника.
7. Turn out screws and a bolt of fastening back directing glasses.
8. Remove motionless glass from a back door.
9. Remove mobile glass from a back door.
10. Remove external влагозащитную a strip from a back door.
11. Turn out screws and remove стеклоподъемник. Disconnect draught from the internal handle of a door.
12. Remove a latch of a door and the door-lock modulator.
13. Remove the external handle.
14. Installation is spent to sequences, return to removal.