Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
- 12. A steering
   12.1. Specifications
   12.2. The mechanism of adjustment of a corner of an inclination of a steering column
   12.3. Steering transfer without the steering amplifier
   12.4. Steering draught
   12.5. Check люфта a steering wheel on cars with the steering amplifier
   12.6. Check of a corner of turn of forward wheels
   12.7. Check of the twisting moment of a pin of the spherical hinge of a tip of steering draught
   12.8. Check of effort of turn of a steering wheel on cars with the steering amplifier
   12.9. Check of return of a steering wheel in a starting position
   12.10. Check of level of a liquid
   12.11. Liquid replacement in a hydraulic drive of the amplifier of a steering
   12.12. Prorolling of hydraulic system of the amplifier of a steering
   12.13. Check of a tension of a belt of a drive of the pump of the amplifier of a steering
   12.14. Check of pressure of a liquid in hydraulic system
   12.15. Steering transfer of cars with the steering amplifier
   12.16. Hoses of the amplifier of a steering
   12.17. The pump of the amplifier of a steering
   12.18. Search and elimination of malfunctions (a steering without the amplifier)
   12.19. Search and elimination of malfunctions (a steering with the amplifier)
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes







12.7. Check of the twisting moment of a pin of the spherical hinge of a tip of steering draught

PERFORMANCE ORDER
1. Screw two nuts on a pin of the spherical hinge of a tip of steering draught and measure twisting moment which it is necessary to put for проворачивания pins of the spherical hinge.

The twisting moment which it is necessary to put for проворачивания pins of the spherical hinge: 2–5 Н•м

2. If the twisting moment exceeds admissible value, replace a tip of steering draught.

The prevention

If the twisting moment of less admissible value, the spherical hinge can repeatedly be used, if it has no considerable люфта