Hyundai Accent

Repair and car operation


Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
- 12. A steering
   12.1. Specifications
   12.2. The mechanism of adjustment of a corner of an inclination of a steering column
   12.3. Steering transfer without the steering amplifier
   12.4. Steering draught
   12.5. Check люфта a steering wheel on cars with the steering amplifier
   12.6. Check of a corner of turn of forward wheels
   12.7. Check of the twisting moment of a pin of the spherical hinge of a tip of steering draught
   12.8. Check of effort of turn of a steering wheel on cars with the steering amplifier
   12.9. Check of return of a steering wheel in a starting position
   12.10. Check of level of a liquid
   12.11. Liquid replacement in a hydraulic drive of the amplifier of a steering
   12.12. Prorolling of hydraulic system of the amplifier of a steering
   12.13. Check of a tension of a belt of a drive of the pump of the amplifier of a steering
   12.14. Check of pressure of a liquid in hydraulic system
   12.15. Steering transfer of cars with the steering amplifier
   12.16. Hoses of the amplifier of a steering
   12.17. The pump of the amplifier of a steering
   12.18. Search and elimination of malfunctions (a steering without the amplifier)
   12.19. Search and elimination of malfunctions (a steering with the amplifier)
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes



12.12. Prorolling of hydraulic system of the amplifier of a steering
PERFORMANCE ORDER
1. Disconnect a high-voltage wire from the ignition coil. Periodically include a starter on 15-20 with and thus 5–6 times turn a steering wheel from an emphasis against the stop.
The prevention

In the course of prorolling constantly add a liquid that its level in a tank did not fall below a filter installation site.
If prorolling to execute, when the cranked shaft of the engine does not rotate, air will be again dissolved in a liquid. Be convinced, that carried out prorolling during the moment проворачивания a cranked shaft of the engine.
2. Connect a high-voltage wire to the ignition coil, start up the engine and leave it to work on frequency of rotation of idling.
3. Turn a steering wheel from an emphasis against the stop some times. Check up, that the liquid does not foam also its level has not gone down.
The prevention

To exclude damages, do not keep a steering wheel turned against the stop within more than 10 seconds.
4. Check up, that the liquid has no dairy colour and its level is between labels on щупе.
5. Check up, that there is a little change of level of a liquid at steering wheel turn in the left and right parties.
The prevention

If liquid level changes considerably, repeat prorolling of hydraulic system of the amplifier of a steering.
If liquid level raises suddenly after an engine stop, means, in system still there is air.
If in a hydraulic drive of the amplifier of a steering there is air, at pump work extraneous noise will be audible. Air in system will reduce a resource of work of the pump and other parts.