Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
- 12. A steering
   12.1. Specifications
   12.2. The mechanism of adjustment of a corner of an inclination of a steering column
   12.3. Steering transfer without the steering amplifier
   12.4. Steering draught
   12.5. Check люфта a steering wheel on cars with the steering amplifier
   12.6. Check of a corner of turn of forward wheels
   12.7. Check of the twisting moment of a pin of the spherical hinge of a tip of steering draught
   12.8. Check of effort of turn of a steering wheel on cars with the steering amplifier
   12.9. Check of return of a steering wheel in a starting position
   12.10. Check of level of a liquid
   12.11. Liquid replacement in a hydraulic drive of the amplifier of a steering
   12.12. Prorolling of hydraulic system of the amplifier of a steering
   12.13. Check of a tension of a belt of a drive of the pump of the amplifier of a steering
   12.14. Check of pressure of a liquid in hydraulic system
   12.15. Steering transfer of cars with the steering amplifier
   12.16. Hoses of the amplifier of a steering
   12.17. The pump of the amplifier of a steering
   12.18. Search and elimination of malfunctions (a steering without the amplifier)
   12.19. Search and elimination of malfunctions (a steering with the amplifier)
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes







12.4. Steering draught

1 – steering draught;
2 – a steel collar;
3 – a protective cover;
4 – a nut, 16–34 Н•м;
5 – a tip of steering draught;
6 – a collar.

Removal


PERFORMANCE ORDER
Remove steering transfer, a gear wheel and steering draughts from the car as knot in gathering.

Dismantling

PERFORMANCE ORDER
1. Fix steering transfer to a vice which sponges are closed by a soft material.

The prevention

At fastening of steering transfer in a vice wrap up steering transfer by a fabric and be careful not to damage it at compression of a vice.


2. Ослабьте a collar also remove a protective cover from steering transfer.
3. Using a chisel, turn away a nut of fastening of the left steering draught.

The prevention

If gear рейка should be removed, remove the left steering draught.


4. Move gear рейку completely to the right and fix in a vice which sponges are closed by a soft material. Ослабьте fastening also remove the left steering draught from steering transfer.
5. Remove the right steering draught, having repeated steps 3 and 4.

Check

PERFORMANCE ORDER
1. Check up steering draughts and tips of steering draughts on absence of damages or deformations.
2. Check up protective covers on absence of damages or form distortions.
3. Check up twisting moment which it is necessary to put for проворачивания pins of the spherical hinge.

The twisting moment which it is necessary to put for проворачивания pins of the spherical hinge: 2–5 Н•м

4. Check up functioning of the spherical hinge of steering draught and axial люфт.

Assemblage

PERFORMANCE ORDER
1. After installation of steering draughts tighten nuts of their fastening by the demanded moment and bend a nut fillet in шпоночный a groove.

The inhaling moment: 80–100 Н•м

2. Fix a protective cover of steering draught a metal collar.


The prevention

The collar of fastening of a protective cover is necessary for establishing after adjustment of a convergence of forward wheels.


3. Measure a transfer course.

Transfer full speed: 134 mm

The prevention

The transfer full speed defines the maximum corner of turn of forward wheels.


4. Adjust length of steering draught and tighten a counternut.

Length of steering draught: 185,2 mm
The inhaling moment: 50–55 Н•м


Installation

PERFORMANCE ORDER
Establish steering transfer and steering draughts as knot in gathering.