Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
- 4. Cooling system
   4.1. Specifications
   4.2. Check of tightness of system of cooling
   4.3. Check of density of a cooling liquid
   4.4. Поликлиновой a belt
   4.5. Tubes and hoses of system of cooling
   4.6. The water pump of engine SOHC
   4.7. The water pump of engine DOHC
   4.8. A radiator
   4.9. A radiator cover
   4.10. Engine SOHC thermostat
   4.11. Engine DOHC thermostat
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes




поменять на nissan almera тормозные колодки



4.2. Check of tightness of system of cooling

PERFORMANCE ORDER
1. Wait while the radiator will not be cooled to temperature 38°C, remove a cover of a radiator and instead of it connect the device for check of tightness of system of cooling.
2. Create pressure 139,3 кПа in cooling system.
3. Be convinced, that pressure 139,3 кПа in cooling system remains within 2 minutes

The prevention

Do not remove a radiator cover on the hot engine as leaving steams can lead to strong burns.
Close a cover of a radiator thick rags and slowly turn away a cover before occurrence of hissing of leaving steam.
After the termination of an exit of steam slowly turn on, and remove a cover from a radiator.


4. Otherwise define a place of leak and eliminate it.