Hyundai Accent

Repair and car operation

Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
- 4. Cooling system
   4.1. Specifications
   4.2. Check of tightness of system of cooling
   4.3. Check of density of a cooling liquid
   4.4. Поликлиновой a belt
   4.5. Tubes and hoses of system of cooling
   4.6. The water pump of engine SOHC
   4.7. The water pump of engine DOHC
   4.8. A radiator
   4.9. A radiator cover
   4.10. Engine SOHC thermostat
   4.11. Engine DOHC thermostat
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes

4.8. A radiator

1 – a hose of an oil radiator of cars with an automatic transmission;
2 – the bottom support;
3 – the bottom hose of a radiator;
4 – the top support;
5 – a radiator cover;
6 – a tube plum;
7 – the top hose of a radiator;
8 – a broad tank.


1. Disconnect a wire from the negative plug of the storage battery and a socket from the engine of the fan of a radiator.
2. Establish the handle of adjustment of temperature in car salon on the maximum temperature.
3. Turn out a stopper plum on a radiator and merge cooling liquid in the suitable container.
4. Ослабьте collars also disconnect the top and bottom hoses from a radiator.
5. On cars with an automatic transmission disconnect hoses from an oil radiator.

The prevention

For an exception вытекания трансмиссионной liquids and dirt hits in system, close the ends of hoses of an oil radiator approaching заглушками.

6. Turn out bolts of fastening of a radiator.
7. Remove a radiator together with the radiator fan.
8. Remove the engine of the fan from a radiator.


1. Check up on absence погнутых radiator plates. If necessary, using a hairbrush, straighten platinum.
2. Check up a radiator on absence of cracks, damages and absence of leaks.
3. Check up radiator hoses on absence of cracks, damages and attritions.
4. Check up a broad tank on absence of damages.
5. Check up a radiator cover.
6. Check up pressure of opening of the valve of a cover of a radiator.
7. Check up a lining of a cover of a radiator on absence of cracks and damages.

Check of the engine of the fan of a radiator

1. Check up, that the engine of the fan of a radiator rotates at giving on it pressure from the storage battery.
2. Check up, that at engine work there are no extraneous noise.


1. Installation is spent to sequences, return to removal. Fill in in cooling system necessary quantity of a demanded cooling liquid.
2. Start up the engine and leave it to work until the thermostat valve will open, then stop the engine.
3. Remove a cover of a radiator and to add cooling liquid to an upper edge of a mouth of a radiator.
4. Check up absence of leaks from cooling system.