Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
- 4. Cooling system
   4.1. Specifications
   4.2. Check of tightness of system of cooling
   4.3. Check of density of a cooling liquid
   4.4. Поликлиновой a belt
   4.5. Tubes and hoses of system of cooling
   4.6. The water pump of engine SOHC
   4.7. The water pump of engine DOHC
   4.8. A radiator
   4.9. A radiator cover
   4.10. Engine SOHC thermostat
   4.11. Engine DOHC thermostat
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes




4.5. Tubes and hoses of system of cooling

Tubes and hoses of system of cooling of engine SOHC

1 – a bolt, 10–15 Н•м;
2 – bypass a hose;
3 – a sealing ring;
4 – the union of an exit of a cooling liquid;
5 – a hose for a cooling liquid;
6 – a hose of giving of a cooling liquid to a heater.

Tubes and hoses of system of cooling of engine DOHC

1 – an entrance pipe of a cooling liquid; 2 – the union of an exit of a cooling liquid.

Check

PERFORMANCE ORDER
1. Check up tubes and hoses of system of cooling on absence of damages, cracks and swellings.
2. If necessary replace them.

Replacement

PERFORMANCE ORDER
1. At hose connection to the union of an exit of a cooling liquid preliminary grease a sealing ring with a cooling liquid.
2. Be convinced, that the yellow label on the end of an entrance hose of a cooling liquid was combined with a yellow label on the union.


The prevention

Do not oil a sealing ring or lubricant.
Before installation of hoses clear unions of a dirt, a dust and sand.
Insert a pipe of a cooling liquid against the stop into the water pump.
At installation use only a new sealing ring.