Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
- 6. Fuel system
   6.1. Specifications (SOHC and DOHC)
   6.2. Check of the fuel pump
   6.3. Check of the pressure created by the fuel pump
   6.4. Checks of system of injection MFI
   6.5. A control lamp of malfunctions (MIL)
   6.6. Diagnostic codes of malfunctions ŤOBD-IIť
   6.7. Diagnostic codes of malfunctions, except ŤOBD-IIť
   6.8. Replacement of the fuel filter
   6.9. Replacement of the terminator of overflow (the double-thread valve)
   6.10. Replacement of the gauge of level of fuel
   6.11. A control system of engine MFI
   6.12. Fuel atomizers
   6.13. Throttle knot
   6.14. The power supply system with the carburettor
   6.15. Check of frequency of rotation of idling
   6.16. Adjustment of frequency of rotation of idling
   6.17. Frequency of rotation of idling and adjustment of a fuel mix
   6.18. Check and starting arrangement adjustment
   6.19. Check and adjustment of a free course of a cable of an accelerator
   6.20. A fuel tank
   6.21. The canister of catching of steams of fuel
   6.22. Replacement of the fuel filter
   6.23. The carburettor
   6.24. A cable and an accelerator pedal
   6.25. Search and elimination of malfunctions of fuel system with the carburettor
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes




6.8. Replacement of the fuel filter

PERFORMANCE ORDER
1. Remove a pillow of back sitting and remove the inspection panel of the fuel pump. For pressure removal in fuel system disconnect a socket of the fuel pump, start the engine and wait while it will not stop in connection with development of fuel from топливопроводов and a fuel highway.
2. Disconnect a wire from the negative plug of the storage battery and connect a socket of the fuel pump.

The prevention

Before separation топливопроводов remove pressure in fuel system as, otherwise, the fuel which is under pressure, will intensively follow from fuel system.


3. Turn out screws of fastening of clips of tubes of the fuel filter.

The prevention

Close the fuel filter a towel to exclude разбрызгивание the fuel, caused by residual pressure in топливопроводе.


4. Turn out bolts of fastening of the fuel filter and remove it from an arm.
5. After replacement of the fuel filter check up tightness of fuel system.