Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
- 11. A suspension bracket
   11.1. Specifications
   11.2. The bottom lever of a forward suspension bracket
   11.3. Replacement of the plug of the bottom lever
   11.4. Plug replacement (G) the bottom lever
   11.5. The forward stabilizer of cross-section stability
   11.6. A rack of a back suspension bracket
   11.7. Replacement of the plug of the back longitudinal lever of a back suspension bracket
   11.8. Replacement of the plug of the back cross-section lever (And and) a back suspension bracket
   11.9. The back stabilizer of cross-section stability
   11.10. Corners of installation of forward wheels
   11.11. Adjustment of a convergence of back wheels
   11.12. Deterioration of tyres
   11.13. Chains противоскольжения
   11.14. Wheel palpation
   11.15. A tightening of nuts of fastening of a wheel
   11.16. Shift of wheels
   11.17. Check of withdrawal and course instability of the car
   11.18. Care of disks from an aluminium alloy
   11.19. Search and elimination of malfunctions
   11.20. Diagnostics of deterioration of tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes




11.1. Specifications

Suspension bracket

Forward suspension bracket
Type MacPherson with a cylindrical spring
Diameter of a wire х diameter х height of a cylindrical spring, mm 12,3х140х305/314,9
Identification colour 12,3х140х305/314,9
The shock-absorber
Type The hydraulic
Course, mm 161
Демпфирующая force at 0,3 km/s Expansion, Н 470±100
Compression, Н 540±70
The size of tyres 155/80 R13, 175/70 R13, 185/60 HR14
Diameter of a disk, mm 4,5JX13, 5Jx13, 5Jx14
Pressure of inflating of the tyre, кПа 210
Back suspension bracket
Diameter of a wire х diameter х height of a cylindrical spring, mm 12,0х95,0х150,0
Spring height in a free condition, mm 344
Identification colour Желтый–1 A line
The shock-absorber
Type The hydraulic
Course, mm 211
Демпфирующая force at 0,3 km/s Expansion, Н 390±100
Compression, Н 330±70

Corners of installation of wheels


The name
Forward wheels
Back wheels
Convergence, mm 0±3 3±2
Disorder 0°±30 ' -41°yo30 '
Corner of a longitudinal inclination шкворня 1°48'±30 '  
Corner of an inclination rotary шкворня 11°03'±30 '  
Displacement rotary шкворня, mm 5,8  

Wheels


Wheel palpation Steel disks Aluminium disks
Radial, mm 0,6 0,3
Axial, mm 1,0 0,3

The inhaling moments, Н•м


Nuts of fastening of a power shaft 220–250
The top nuts of fastening of a forward rack 20–30
Rack to the hinge 75–90
Самоконтрящиеся rack nuts 60–70
The spherical hinge of the bottom lever to the hinge 60–72
Arm to the bottom lever 95–120
Bolt of fastening of an arm of the bottom lever 95–120
Bolt of fastening of an arm of the stabilizer of cross-section stability 17–26
The spherical hinge of a tip of steering draught 15–34
Nuts of fastening of draught of the stabilizer 35–45
Bolt of a back support to the bottom frame 30–40
Nut of fastening of a back support 45–60
The top nut of fastening of a back rack 20–30
The bottom nut of fastening of a back rack 75–90
Самоконтрящаяся a nut of a back rack 45–50
Draught of the back stabilizer for the stabilizer of cross-section stability 35–45
Bolt of fastening of an arm of the back stabilizer of cross-section stability 17–26
The lever of a back suspension bracket to a fixing element of an axis 130–150
The lever of a back suspension bracket () to a body 100–120
The lever of a back suspension bracket () to a body 80–100
Nut of fastening of the back lever to a fixing element of an axis 130–150
Nut of fastening of the back lever to an arm 100–120
The back lever to a body 40–50

The inhaling moments, Н•м

The spherical hinge of the bottom lever Lubricant R–2 As it is required
The rack bearing Lubricant SAE J310a, NLGI №1 As it is required