Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
- 11. A suspension bracket
   11.1. Specifications
   11.2. The bottom lever of a forward suspension bracket
   11.3. Replacement of the plug of the bottom lever
   11.4. Plug replacement (G) the bottom lever
   11.5. The forward stabilizer of cross-section stability
   11.6. A rack of a back suspension bracket
   11.7. Replacement of the plug of the back longitudinal lever of a back suspension bracket
   11.8. Replacement of the plug of the back cross-section lever (And and) a back suspension bracket
   11.9. The back stabilizer of cross-section stability
   11.10. Corners of installation of forward wheels
   11.11. Adjustment of a convergence of back wheels
   11.12. Deterioration of tyres
   11.13. Chains противоскольжения
   11.14. Wheel palpation
   11.15. A tightening of nuts of fastening of a wheel
   11.16. Shift of wheels
   11.17. Check of withdrawal and course instability of the car
   11.18. Care of disks from an aluminium alloy
   11.19. Search and elimination of malfunctions
   11.20. Diagnostics of deterioration of tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes




11.20. Diagnostics of deterioration of tyres

Deterioration of the central part of a protector

Very much a high pressure in the tyre
Deterioration of the central part of a protector to a cord because of a high pressure in the tyre

Deterioration of two lateral parts of a protector


Low pressure in the tyre
Camber on закраине tyres
Fast deterioration

Вырывание tyre pieces


Вырывание badly established patch as a result of action of centrifugal force

One party of a protector is worn out more than the second


Wrong corner of disorder of forward wheels

Flat stains on a protector

Braking with blocking of wheels

Inflow or ledge on the tyre


The convergence of wheels is broken

Unreliable fastening of a patch

In one place some patches are established

Non-uniform deterioration of the tyre


Balancing of wheels, malfunctions of steering transfer, a suspension bracket or the bearing is broken

There is no protector drawing


The protector is worn out below an admissible limit