Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
- 11. A suspension bracket
   11.1. Specifications
   11.2. The bottom lever of a forward suspension bracket
   11.3. Replacement of the plug of the bottom lever
   11.4. Plug replacement (G) the bottom lever
   11.5. The forward stabilizer of cross-section stability
   11.6. A rack of a back suspension bracket
   11.7. Replacement of the plug of the back longitudinal lever of a back suspension bracket
   11.8. Replacement of the plug of the back cross-section lever (And and) a back suspension bracket
   11.9. The back stabilizer of cross-section stability
   11.10. Corners of installation of forward wheels
   11.11. Adjustment of a convergence of back wheels
   11.12. Deterioration of tyres
   11.13. Chains противоскольжения
   11.14. Wheel palpation
   11.15. A tightening of nuts of fastening of a wheel
   11.16. Shift of wheels
   11.17. Check of withdrawal and course instability of the car
   11.18. Care of disks from an aluminium alloy
   11.19. Search and elimination of malfunctions
   11.20. Diagnostics of deterioration of tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes



Гравийный Щебень купить.

11.18. Care of disks from an aluminium alloy

PERFORMANCE ORDER
1. The aluminium alloy is subject to harmful influence of alkali. If the car was exposed to influence of salt from sea water or road химикалий, it is necessary to wash out immediately the car pure water then to put a wax polyrole on disks of all wheels for their protection against corrosion.
2. At use of steam for a sink of the car do not direct it on disks of wheels.
3. At a tightening of nuts of fastening of wheels with aluminium disks observe following recommendations:

a. Clear a plug surface;
b. Tighten nuts of fastening of a wheel the demanded moment of an inhaling;
c. Do not tighten a nut of fastening of a wheel, pressing on a key a foot;
d. Do not grease a carving of nuts of fastening of a wheel.