|
2. Check up twisting moment which it is necessary to put for проворачивания pins of the spherical hinge of draught of the stabilizer.
If there are cracks in a protective cover, replace it and add greasing in the hinge.
Some times shake here and there a pin of the spherical hinge of draught of the stabilizer.
Screw on a pin of the spherical hinge самоконтрящуюся a nut and measure twisting moment. The twisting moment: 1,7–3,2 Н•м
If the twisting moment exceeds admissible values, replace draught of the stabilizer.
If the twisting moment considerably below admissible value, the spherical hinge can repeatedly be used, if it is not got jammed and has no excessive люфта.
|