Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
- 13. Brake system
   13.1. Specifications
   13.2. Antiblocking system of brakes (ABS)
   13.3. Prorolling of hydraulic system of a drive of brakes with scanner use
   13.4. Check and adjustment of position of a pedal of a brake
   13.5. Check of the vacuum amplifier of brakes
   13.6. Prorolling of hydraulic system of a drive of brakes
   13.7. Adjustment of a course of a lay brake
   13.8. The vacuum amplifier of brakes
   13.9. Brake tubes and hoses
   13.10. A pressure regulator
   13.11. A brake pedal
   13.12. Replacement of lobbies brake колодок
   13.13. A support of a forward brake
   13.14. The main brake cylinder
   13.15. Replacement brake колодок on back drum-type brakes
   13.16. Replacement of the working brake cylinder
   13.17. A lay brake
   13.18. Hydraulic block HECU ABS
   13.19. The gauge of frequency of rotation of a wheel
   13.20. Search and elimination of malfunctions
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes







13.11. A brake pedal

1 – the switch of stoplights;
2 – plugs;
3 – an arm;
4 – a spring;
5 – a pedal

Removal

PERFORMANCE ORDER
1. Remove the switch of stoplights.
2. Turn away a nut with a fillet (4EA) and a bolt (1EA) fastenings of an arm of a pedal of a brake.
3. Remove шплинт and remove a pin with a head and an aperture under шплинт.
4. Remove knot of a pedal of a brake.

Check

PERFORMANCE ORDER
1. Check up the plug on absence of deterioration.
2. Check up a brake pedal on absence of curvatures.
3. Check up a spring of return of a pedal of a brake on absence of damages.
4. Check up the switch of stoplights

1) an Ohmmeter connected to plugs of the switch of stoplights, check up its conductivity.
2) By pressing плунжера conductivity should be absent and appear at clearing плунжера.

Installation

PERFORMANCE ORDER
1. Installation is spent to sequences, return to removal.

The prevention

Be convinced, that have established шплинт on a pin with a head and an aperture under шплинт draughts of a pedal of a brake.


2. Establish knot of a pedal of a brake and fix nuts with a fillet and a bolt.

The inhaling moment: 8–12 Н•м

3. Check up and, if necessary, adjust height of installation of a pedal and a free course of a pedal of a brake.
4. Establish the switch of stoplights.