Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
- 13. Brake system
   13.1. Specifications
   13.2. Antiblocking system of brakes (ABS)
   13.3. Prorolling of hydraulic system of a drive of brakes with scanner use
   13.4. Check and adjustment of position of a pedal of a brake
   13.5. Check of the vacuum amplifier of brakes
   13.6. Prorolling of hydraulic system of a drive of brakes
   13.7. Adjustment of a course of a lay brake
   13.8. The vacuum amplifier of brakes
   13.9. Brake tubes and hoses
   13.10. A pressure regulator
   13.11. A brake pedal
   13.12. Replacement of lobbies brake колодок
   13.13. A support of a forward brake
   13.14. The main brake cylinder
   13.15. Replacement brake колодок on back drum-type brakes
   13.16. Replacement of the working brake cylinder
   13.17. A lay brake
   13.18. Hydraulic block HECU ABS
   13.19. The gauge of frequency of rotation of a wheel
   13.20. Search and elimination of malfunctions
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes







13.19. The gauge of frequency of rotation of a wheel

1 – a rotor;

2 – the forward gauge of frequency of rotation of a wheel, 8–9,5 Н•м;

3 – the back gauge of frequency of rotation of a wheel, 15,5–16,5 Н•м.

Removal

The forward gauge of frequency of rotation of a wheel


PERFORMANCE ORDER
Turn out a bolt and remove the forward gauge of frequency of rotation of a wheel after a socket detachment.

The back gauge of frequency of rotation of a wheel

PERFORMANCE ORDER
1. Remove a pillow of back sitting.
2. Remove an upholstery of a back rack.
3. Remove a back wheel.
4. Remove the back gauge of frequency of rotation of a wheel after a socket detachment.

Check

PERFORMANCE ORDER
1. Measure resistance of the gauge of frequency of rotation of a wheel.

Resistance:
The forward gauge: 1275–1495 Ohm
The back gauge: 1275–1495 Ohm

2. Establish the gauge of frequency of rotation of a wheel on the car and, having connected the voltmeter to gauge contacts, measure the pressure developed by the gauge at rotation of a wheel.

The prevention

Switch the voltmeter for alternating voltage measurement.