|
|
Hyundai AccentRepair and car operation |
|
|
Hyundai Accent + 1. The maintenance instruction + 2. The engine + 3. Greasing system + 4. Cooling system + 5. The control, toxicity decrease + 6. Fuel system + 7. Ignition system + 8. Coupling + 9. A transmission + 10. Axes and power shafts + 11. A suspension bracket + 12. A steering + 13. Brake system + 14. A body + 15. A central air - 16. The electric equipment 16.1. Specifications 16.2. Electric chains 16.3. Gymnastics system 16.4. Check of an electric chain of gymnastics 16.5. Power failure check on a wire connecting the storage battery with the generator 16.6. Check of the current developed by the generator 16.7. Check of developed pressure 16.8. The generator 16.9. The storage battery 16.10. Check of relative density of electrolit 16.11. Gymnastics of the storage battery 16.12. Survey of the storage battery 16.13. Start system 16.14. A starter 16.15. Check and replacement of elements статора 16.16. The switch of blocking of ignition 16.17. Check of the relay of a starter 16.18. Check of the switch of blocking of ignition 16.19. A radio receiver 16.20. Dynamics 16.21. The aerial 16.22. The multipurpose switch 16.23. A sound signal 16.24. Safety locks 16.25. A combination of devices 16.26. The engine of a screen wiper of a windscreen 16.27. Replacement of a headlight and the forward index of turn 16.28. Adjustment of light of headlights + 17. The appendix + 18. Electroschemes |
16.13. Start systemThe start system includes the storage battery, a starter, the traction relay, the lock of ignition blocking the switch (only on cars with an automatic transmission) and wires.At starter inclusion through a winding of the traction relay of a starter the current from the storage battery starts to proceed, the relay anchor is involved also relay contacts become isolated. Simultaneously the relay anchor through the lever moves обгонную муфту with a gear wheel. The nave обгонной муфты turns on screw шлицах a starter shaft together with a gear wheel that facilitates its input in gearing with a gear wreath of a flywheel. Through the closed contacts of the traction relay there is a current feeding windings статора both anchors, and the starter anchor starts to rotate together with a nave and обгонной муфтой. After the engine starts to work, frequency of rotation of a gear wheel exceeds frequency of rotation of an anchor of a starter, обгонная муфта is freely turned and the twisting moment is not transferred from a flywheel to a starter shaft. After отпускания the ignition key the feed circuit of a winding of the traction relay is disconnected, the anchor of the traction relay is wrung out by a spring in a starting position, relay contacts are disconnected also a drive gear wheel leaves gearing with a gear wreath of a flywheel. |
|