Hyundai Accent

Repair and car operation

Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
- 16. The electric equipment
   16.1. Specifications
   16.2. Electric chains
   16.3. Gymnastics system
   16.4. Check of an electric chain of gymnastics
   16.5. Power failure check on a wire connecting the storage battery with the generator
   16.6. Check of the current developed by the generator
   16.7. Check of developed pressure
   16.8. The generator
   16.9. The storage battery
   16.10. Check of relative density of electrolit
   16.11. Gymnastics of the storage battery
   16.12. Survey of the storage battery
   16.13. Start system
   16.14. A starter
   16.15. Check and replacement of elements статора
   16.16. The switch of blocking of ignition
   16.17. Check of the relay of a starter
   16.18. Check of the switch of blocking of ignition
   16.19. A radio receiver
   16.20. Dynamics
   16.21. The aerial
   16.22. The multipurpose switch
   16.23. A sound signal
   16.24. Safety locks
   16.25. A combination of devices
   16.26. The engine of a screen wiper of a windscreen
   16.27. Replacement of a headlight and the forward index of turn
   16.28. Adjustment of light of headlights
+ 17. The appendix
+ 18. Electroschemes

16.21. The aerial

1. Disconnect a wire from the negative plug of the storage battery.
2. Remove back cross-section furnish and an upholstery from the left back party of a luggage carrier.
3. Turn away a nut of fastening of the aerial and get a bolt.

Disconnect an antenna cable and wires of giving of pressure to the aerial.
4. Installation is spent to sequences, return to removal.

Aerial check

1. Disconnect a socket from the aerial.
2. Check up, whether pressure of the storage battery on contacts 1 and 3 sockets moves constantly.
3. Check up, whether pressure of the storage battery on contacts 1 and 2 sockets moves at ignition and radio receiver inclusion.
4. Additional wires submit pressure of the storage battery on contacts 3 and 2 and check up, whether the aerial engine (the aerial should be put forward) works.
5. Check up, whether the engine of the aerial after a detachment of contact 2 from the battery (the aerial should move downwards) works.