Hyundai Accent

Repair and car operation

Make sitting adjustment only on the motionless car. Non-observance of this rule can lead to control loss over the car and to road and transport incident, that in turn can lead to car damage, serious traumas or death.

Adjustment of an inclination of a back of sitting

For an inclination of a back of sitting, bend forward to remove the weight from a back of sitting and pull the lever of adjustment of an inclination of a back of sitting upwards. Press a back of sitting and establish it in desirable position. To fix a sitting back in new position, release the lever of adjustment of a back of sitting.

To reduce risk of occurrence of a trauma at road and transport incident (failure) or sharp braking, backs of seats of the driver and the forward passenger should be in the position whenever possible close to the vertical. Efficiency of protection of seat belts and inflatable pillows of safety can be considerably reduced, when the sitting back is inclined.
There is a high probability of that when the sitting back is inclined, the driver and the forward passenger can slip out from under a seat belt that will entail serious traumas at collision of the car during road and transport incident.

If it is necessary to put forward a headrest upwards, extend it before desirable position. If it is necessary to lower a headrest, press a clamp and simultaneously press a headrest down to demanded position.

For reduction of probability of reception of a trauma in case of collision establish height of headrests so that its centre settled down as it is possible more precisely at level of eyes. If between your back and a sitting back there is a pillow or something similar it can increase distance between your head a headrest and efficiency of headrests in case of failure will be lowered.
It is dangerous to go by the car with incorrectly adjusted headrests or at all without them. Be necessarily convinced of correctness of installation and adjustment of headrests. Otherwise, reception of a serious trauma of area of a neck is possible at road and transport incident.

For adjustment lumbar подпора, turn, the lever of adjustment lumbar подпора located on a back of sitting of the driver. For increase in force of support move the lever of adjustment lumbar подпора towards a forward part of the car. For easing of force of support move the lever of adjustment lumbar подпора towards a back part of the car.

To lift or lower a forward part of a pillow of sitting, turn the forward handle forward or back. To lift or lower a back part of a pillow of sitting, turn the back handle forward or back.

Heating of seats

The device is intended for heating of forward seats in a cold season. With the ignition key in position "ОN" press any of switches on the back console for heating either a driver's seat, or a seat of the passenger.
In a warm season or when the heating of seats is not necessary, establish switches in position "ОFF".

Access to a back seat on three-door models

For access to back sitting, it is necessary to incline a back of a forward seat.
Pull upwards the lever of an inclination of a back of sitting from an external part of sitting of the forward passenger, the sitting back will bend forward and the seat will automatically move forward.

Passengers of back sitting can incline a back of forward sitting, having pressed on a pedal shown in drawing 15.

The passengers sitting on back sitting, should be accurate and not press a pedal 2 during car movement because that can lead to moving of a back of sitting forward and put a trauma to the passenger of forward sitting.